Electrical & Computer Engineering Facilities
Facilities
P-108 A+ Certification Classroom
P-108B Faraday Room
P-112 Process Control/Power Laboratory
P-208 General Purpose Electronics Laboratory
P-212 Networking Laboratory/General Purpose Electronics Laboratory
P-308 General Purpose Electronics Laboratory
P-316 General Purpose Electronics Laboratory
|
 |
Potter Building Room 108 A+ Certification
Classroom
Laboratory consisting of 18 workstations. Each station has
a switch which provides access to one Intel 800MHz PC for
software configuration, or Pentium III 500 Mhz based machines
for hardware configurations. |
 |
Potter Building Room 108B Faraday
Room
Used for electronic experimentation requiring elimination
of EMF and other interference. |
 |
Potter Building Room 112 Process Control/Power
Laboratory
Provides a wide variety of process control and
instrumentation experiments. 12 workstations with HP 100 Mhz
oscilloscopes, 15 Mhz signal generators, DMM's, and +/-20 VDC
triple output power supplies. 8 Allen Bradley PLC 5 series
stations, with Pentium III based 500 and 533 MHz Dell Optiplex
computers with GPIB capability. |
 |
Potter Building Room 208 General Purpose
Electronics Laboratory
Laboratory consisting of 18 Pentium 4, GHz Dell Optiplex
GX260 computers with 18" LCD displays and hyper-threading,
interfaced to HP 100 MHz oscilloscopes, 15 Mhz signal
generators, DMM's, and +/-20 VDC triple output power supplies.
1 Pentium III based PC for EEPROM, FPGA, and PLD
programming. |
 |
Potter Building Room 212 Networking
Laboratory/General Purpose Electronics Laboratory
T12 Pentium 4 / 2.4GHz Dell Optiplex computers with 18" LCD
displays for general purpose and for networking course
instruction. ECET networking courses use the same machines to
set up independent networks utilizing the VMWare software to
install a network operating system. Using VMWare, each
workstation allows multiple standard operating systems and
their applications to run with high performance in secure and
transportable virtual machines. Also, 12 workstations with
Tektronix 100 Mhz oscilloscopes, signal generators, DMM's, and
+/-20 VDC triple output power supplies. |
 |
Potter Building Room 308 General Purpose
Electronics Laboratory
19 Pentium 4/1.4GHz and Pentium III 933 & 500Mhz Dell
Optiplex computers. 1 Zeltek EEPROM programmer. 15
workstations with HP 100 Mhz oscilloscopes, 15 Mhz signal
generators, DMM's, and +/-20 VDC triple output power
supplies. |
 |
Potter Building Room 316 General Purpose
Electronics Laboratory
24 Pentium III 733Mhz to 933 MhzDell Optiplex and Dimension
computers. Software includes Code Composer Studio, versions
TMS320 6711 and TMS320 6713 for DSP courses. 15 workstations
with HP 100 MHz and Agilent 500 Mhz oscilloscopes, 15 Mhz
signal generators, DMM's, and +/-20 VDC triple output power
supplies. |